The Van

Thursday, 8 November 2012

Smev Hob & New Worktop.

After finally acquiring a three burner hob last week, eBay bargain and £60 cheaper than in the shops, it meant that the temporary worktop had to be removed.This was 18mm thick and cut as a template to get the sink working.

The new worktop is cut out of 12mm ply and will be laminated with some 3mm Formica , which can then be edged with 15mm knock in strip.

Once the sink and tap had been re plumbed in the hob was fitted and the 12 volt ignition wired in.I just need to buy a fitting then the gas can be connected.


No comments:

Post a Comment